What is the principle of flat filter centrifuge?

Bengbu Jinggong Pharmaceutical Machinery Co, Ltd. was restructured in June 2010. After years of construction and development, the company has gradually formed separation machinery, pharmaceutical machinery, drying equipment, chemical machinery, nitrogen protection systems, etc, and has certain R & D and innovation capabilities .

There are many types of industrial centrifuges, which are often used in filter centrifuges --- flat filter centrifuges. The working principle is mainly to centrifugally press the mixture onto the wall of the filter screen. Liquid flows out through the small holes inside the filter wall and the filter screen. Because the particles are large, the solids are trapped by the filter screen. As the centrifugation time increases, more and more solids accumulate in the drum filter. When the requirements are met, stop the machine and take out the solid for investigation. If the liquid is needed, take it back for treatment.

The working mode of the plate filter centrifuge is different solid gravity (or liquid liquid), the material with larger specific gravity is deposited on the inside of the filter wall, and the lighter material forms a liquid ring on the inside of the filter wall. After the separation requirements are met, common materials are used. The installation of sputum draws out the inner layer of the liquid or sends it out continuously, overflows from the upper plate, and completes the work cycle.

The equipment of the nitrogen protection system of the fully automatic flat plate centrifuge is to ensure that the inside of the centrifuge is not isolated from the outside air. Widely used and strong versatility.

Flat filter centrifuges can be used to separate solid-phase particle suspensions or fiber materials. Turn over the shell, set the feed tube, flushing tube, investigation mirror, and illumination hole. Clean the visible parts in the centrifuge, such as the inner wall of the centrifuge shell, the inner and outer surfaces of the drum, and the appearance of the liquid bottom shell, etc, to ensure that the cleaning requirements comply with GMP regulations.

The company pays attention to personnel training and introduction, in order to improve the product performance and product technology content of the company. The company continuously introduces and learns the advanced technology of foreign separation machinery manufacturing companies. Bengbu Jinggong Pharmaceutical Machinery Co, Ltd. will create a brilliant future together with friends at home and abroad with a brand-new attitude, broad mind and excellent products.