How to make bag centrifuge?

The centrifuge is a machine that uses centrifugal force to separate the components in the liquid and solid particles or the mixture of liquid and liquid. The discharge method of the commonly used automatic centrifuge is basically the method of discharging the scraper. The scraper is slowly approached to the drum wall at a low speed. The solid material layer after the centrifugal separation is scraped off.

Due to the relative motion of the scraper and the drum wall, it is impossible to approach the drum wall without restriction, considering safety. Under normal circumstances, there will be a residual material layer of about 5mm that cannot be peeled off automatically and can only be removed manually. This not only reduces the recovery efficiency of each batch of materials, but also increases the separation time of each batch of materials.

A bag-pulling centrifuge includes a shell, a cover, a bottom plate, a machine base, and scraping tissues. A drum is provided in the shell of the bag-pulling centrifuge. A filter bag is provided on the inner wall of the drum of the bag-pumping centrifuge. A hopper is provided below the drum, and a bearing box is provided at the center of the drum of the bag-pulling centrifuge. The main shaft in the bearing box of the bag-pumping centrifuge is driven by the motor through the pulley to rotate the drum of the bag-pumping centrifuge. The drum is fixed to the base of the bag centrifuge through the bottom plate of the bag centrifuge.

The main shaft of the bag-pulling centrifuge is provided with a jack opening downward from the top end of the bag-pulling centrifuge, and a lifting structure that can move up and down along the axis of the line between the bag-pumping centrifuge is inserted. The filter bags of the bag centrifuge are connected, and the lifting tissue of the bag centrifuge is driven by a driving tissue arranged above it to reciprocate up and down.

The lifting organization of the bag-pulling centrifuge includes a lifting shaft inserted into the jack of the bag-pumping centrifuge, a sleeve sleeve sleeved on the main shaft of the bag-pumping centrifuge and slidingly connected with the main shaft of the bag-pumping centrifuge, and a sleeve sleeved on the bag-pumping centrifuge The spring on the machine shaft and the shaft sleeve, the upper end opening of the bag centrifuge shaft sleeve extends outward to form a baffle for at least restricting the upward movement of the bag centrifuge spring, and a fastening ring is sleeved on the bag centrifuge shaft At least, the fastening ring of the bag-drawing centrifuge is at least used to restrain the spring of the bag-drawing centrifuge from moving downward.